I5000: 5-Axis Positioner Options

P5 -X1 -X2 -X3 -X4 -X5 -X6 -X7 -X8 -X9 -X10

Options
X1: Z-Axis Actuator
MImperial Micrometer (Default)
LLarge Radius Imperial Micrometer
LMLarge Radius Metric Micrometer
DDifferential Micrometer
MMMetric Micrometer
BStepper, Long Life, 0.2µm microstep, RS-232 Onboard Controller
AStepper, Fine Travel, 0.1µm microstep, RS-232 Onboard Controller
BMStepper, Long Life, 12.8µm fullstep, Direct Mini-DIN 8
AMStepper, Fine Travel, 6.4µm fullstep, Direct Mini-DIN 8
BVStepper, Vacuum Comp., Long Life, 0.2µm µstep, RS-232 Onboard Controller
X2: X-Axis Actuator
MManual Micrometer (Default)
BStepper, Long Life, 0.2µm microstep, RS-232 Onboard Controller
AStepper, Fine Travel, 0.1µm microstep, RS-232 Onboard Controller
BMStepper, Long Life, 12.8µm fullstep, Direct Mini-DIN 8
AMStepper, Fine Travel, 6.4µm fullstep, Direct Mini-DIN 8
BVStepper, Vacuum Comp., Long Life, 0.2µm µstep, RS-232 Onboard Controller
X3: Y-Axis Actuator
MManual Micrometer (Default)
BStepper, Long Life, 0.2µm microstep, RS-232 Onboard Controller
AStepper, Fine Travel, 0.1µm microstep, RS-232 Onboard Controller
BMStepper, Long Life, 12.8µm fullstep, Direct Mini-DIN 8
AMStepper, Fine Travel, 6.4µm fullstep, Direct Mini-DIN 8
BVStepper, Vacuum Comp., Long Life, 0.2µm µstep, RS-232 Onboard Controller
X4: Yaw Actuator
MManual Micrometer (Default)
BStepper, Long Life, 0.2µm microstep, RS-232 Onboard Controller
AStepper, Fine Travel, 0.1µm microstep, RS-232 Onboard Controller
BMStepper, Long Life, 12.8µm fullstep, Direct Mini-DIN 8
AMStepper, Fine Travel, 6.4µm fullstep, Direct Mini-DIN 8
BVStepper, Vacuum Comp., Long Life, 0.2µm µstep, RS-232 Onboard Controller
X5: Pitch Actuator
MManual Micrometer (Default)
BStepper, Long Life, 0.2µm microstep, RS-232 Onboard Controller
AStepper, Fine Travel, 0.1µm microstep, RS-232 Onboard Controller
BMStepper, Long Life, 12.8µm fullstep, Direct Mini-DIN 8
AMStepper, Fine Travel, 6.4µm fullstep, Direct Mini-DIN 8
BVStepper, Vacuum Comp., Long Life, 0.2µm µstep, RS-232 Onboard Controller
X6: XY Coarse Adjust
140 pitch set screw (Default)
A flush set screw that gives 1/40 inches per revolution.
240 pitch thumbscrew
A small knob that gives 1/40 inches per revolution at the output. Allows easy adjustment of the coarse control.
2A40 pitch thumbscrew with ext. for XY steppers
A small knob that gives 1/40 inches per revolution at the output. Allows easy adjustment of the coarse control. The X and Y actuators require an extension to leave enough room to access the knobs.
X7: XY Linear Motors
NNone (Default)
X8: Mounting Axis
HHorizontal (Default)
The positioner is set up to be balanced in the horizontal and upright position. (This is the default configuration)
VVertical
The postioner is set up to be balanced with the micrometers pointing up. This configuration requires more preload on the Z-axis.
X9: Side Damper
NNone (Default)
DIncluded
Side damper installed. Quiets vibration in the Y axis.
X10: Units
SIMetric (Default)
Metric Mounting Plate
IImperial
Imperial Mounting Plate